Class 1 Sound Level Meter NL-53 / Class 2 Sound Level Meter NL-43
with Extended Function Program NX-43EX Instruction Manual Operation Guide

8.9 Computer connection

Connect a computer and the device with a commercially available USB Type-C cable as follows.

Note

  • When using the communication function to control the operation of the sound level meter with commands, on the [I/O] screen, set [USB] to [TCP].
  • To use the communication function, refer to the “Communication Guide”.

1Open the bottom cover of the device.

2Insert the Type-C connector of the USB cable into the USB ports of the device and computer.

The SD card inserted into the device is recognized as a removable disk. On the [I/O] screen, set [USB] to [Mass Storage].

The SD card inserted into the device is recognized as a removable disk. On the [I/O] screen, set [USB] to [Mass Storage].